A Create addon for Minecraft 1.21.1 (NeoForge) that brings real computer networking to your factory. Instead of running belts and chutes across the whole base, you wire machines together with network cables, hand out IP addresses, and move items around the way a server room would — routers, storage drives, terminals and all.
⚠️ Work in progress. This mod is still in active development and isn't released anywhere yet. Most blocks are creative-only for now, things may change, and bugs are expected.
Create is fantastic at making things, but moving items across a big base quickly turns into a spaghetti of belts or chains. Frogport Networks takes the opposite approach: lay down cables like network wiring, give every device an address, and let the network do the routing. If you've ever set up a home network — DHCP, static IPs, subnets — you'll feel right at home. If you haven't, the defaults just work.
Cables are thin strips that lie flat on the surface you place them on (floor, wall, ceiling). Each cable has a color, and the color is the network — green cables form one network, blue cables another, and they stay completely separate unless you deliberately link them. A single block can carry up to four strands, so you can run several networks side by side.
You place a plain cable and it picks the next free color automatically. Want a specific one? Shift-right-click an existing strand to "tune" your cable to that run, or right-click any strand with a dye to recolor the whole connected line at once. Left-click removes just the strand you're aiming at.
A Router is the heart of a network. It needs rotational power (it's a Create kinetic block, so give it a shaft) — no rotation, no network. Once it's spinning it hands out IP addresses by DHCP, automatically, lowest free address first. Every device can also be given a static IP if you'd rather assign them yourself.
The NAS (network-attached storage) is your mass storage, AE2-style. It holds disks in its bays, and the items live inside the disks — pull a disk and its contents come with it. Disks come in four tiers (16k → 1M items), and a NAS aggregates all the disks plugged into it.
The Terminal is your window into the whole network. It shows every item stored across all NAS on its network, with:
- tabs for "All" plus one per storage device,
- a search bar, plus sorting (most/least/A–Z/id) and grouping by mod or item tag,
- withdrawing with a click (stack on shift-click),
- and an autocrafting queue — right-click items to queue them up, set amounts, and send the whole batch to a Computer to craft.
The Computer is the autocrafting brain. It's kinetic-powered (faster rotation = faster crafting) and takes upgrade chips:
- process chips (Mixing, Pressing, Deploying, Milling, Haunting, Washing, Smelting, Smoking) let it use those Create/vanilla recipe types, pulling ingredients straight from network storage;
- the AI chip unlocks recursive crafting — ask for a complex item and it'll craft all the intermediate steps it's missing, as long as the raw materials are on the network.
Hover an item in the Terminal and it tells you what it'll consume and what it needs to craft along the way.
- The Network Port bridges physical item transport and the network — funnels, hoppers and especially Create's Packager / logistics can read the whole network's stock through it and request items.
- The Network Bridge is a single transfer rule: move up to N of item X from one IP to another while the destination has less than a threshold.
- The Gateway couples networks of different colors over cables, so item requests can flow between subnets you've deliberately joined.
- The Network Monitor gives you a read-only overview of every network and subnet at once.
If JEI is installed, the Terminal plays nicely with it:
- press R / U on any item in the browser to see its recipe / uses,
- the JEI search bar and the Terminal search stay in sync,
- and you can drag an item from JEI onto the grid to queue it for crafting.
Requires a JDK 21. From the project root:
./gradlew build # produces the mod jar in build/libs/
./gradlew runClient # launch a dev client (with Create + JEI in the dev runtime)If your IDE is missing libraries, ./gradlew --refresh-dependencies refreshes the cache.
Dual-licensed, mirroring Create's own model:
- Code — MIT
- Assets (everything under
src/main/resources/assets/) — All Rights Reserved
See LICENSE for the full text. This mod is an independent addon and is not affiliated with or endorsed by the Create team.