A VoiceMeeter-style virtual audio mixer for Linux, built natively on PipeWire. Route any app or microphone through gated, compressed, EQ'd channel strips into hardware outputs and virtual microphones that Discord, OBS, or any recorder can use.
-
Input strips — hardware strips capture real devices (mic, line in); virtual strips appear as output devices apps can play into (System / Music / Chat out of the box)
-
Per-strip DSP — gate, compressor (with transfer-curve editor), 4-band parametric EQ with an interactive response curve, and a VoiceMeeter-style voice color XY pad — all powered by the LSP LV2 plugins inside PipeWire filter-chains
-
Stereo image per strip — VoiceMeeter-style MONO and ⇄ (swap left/right) buttons plus a balance slider, applied after the EQ
-
Reverb and echo — REVERB / ECHO send knobs on every strip feed two shared effects; the FX panel sets each return's level, mute, which buses it feeds, reverb decay and damping, and echo time and feedback. Both run on PipeWire's built-in filters (the reverb's impulse response is generated on the fly), so no extra plugins are needed
-
Macro buttons — a bar of pads (MACROS in the top bar) that each run a list of actions: mute, solo, route, set a fader, mute an effect return, start/stop a VBAN output, or toggle Default out. Toggle pads switch between an on and an off list; Push pads run one while held and the other on release (push-to-talk). Each pad can have a keyboard shortcut that works while the window has focus
-
Output buses — up to five A buses (A1–A5) to hardware devices and three B buses (B1–B3) as virtual microphones (post-limiter) selectable in any app; add them with +A / +B. Every bus has an 8-band parametric EQ ahead of its limiter
-
Your own layout — add hardware or virtual strips with +, remove any strip or bus (hover its name, click ✕ twice), double-click a name to rename it
-
Routing matrix — one toggle per bus on every strip, applied as live PipeWire links; mute/solo; peak/RMS metering with clip latch at 30 fps
-
VBAN network audio — send any bus's post-limiter mix to VoiceMeeter (or any VBAN receiver) on another machine, and receive VBAN streams as their own input strips with full DSP and routing. Built on PipeWire's native
vban-send/vban-recvmodules; configure it from the VBAN button in the top bar -
Default-output takeover — one click makes the System strip your default sink so all desktop audio flows through the mixer
-
Profiles — everything persists to
~/.config/linuxmeeter/(TOML, hand-editable) and restores on launch; tray icon + close-to-tray + optional autostart keep your devices alive from login -
Clean by design — all virtual devices live in-process and vanish completely when the app exits; WirePlumber is never left managing our volumes
- PipeWire ≥ 1.4 with WirePlumber (the pulse compatibility layer is used by most apps, but linuxmeeter itself talks native PipeWire). The filter-chain module must be built with LV2 support: Ubuntu 24.04's PipeWire 1.0.5 is not, so no strip or bus can load there
lsp-plugins-lv2(gate/compressor/EQ/limiter DSP)webkit2gtk-4.1,gtk3,libayatana-appindicator(UI shell + tray)
pnpm install
pnpm tauri dev # development (mixer runs against your live graph)
pnpm tauri build --no-bundle # release binary at target/release/linuxmeeterpnpm tauri build (with bundling) also produces a .deb under
target/release/bundle/deb/. Arch users: see packaging/PKGBUILD.
pnpm devin a plain browser runs the full UI against a mock backend with simulated meters — the design-iteration environment.- The workspace splits into
lm-protocol(shared types),lm-engine(all PipeWire code, testable headless — seeexamples/), andsrc-tauri(shell + IPC). cargo run --example graph -p lm-enginedrives the full audio topology from a REPL without the UI.
GPL-3.0-or-later. Bundled fonts (Inter, JetBrains Mono) are under the SIL Open Font License.




