You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
Repository navigation
Battery fuse relief: let config say which phase a one-phase battery sits on #1933
Follow-up from #1891 (owner decision, 28 Oct 2026: accepted as a known limit for stable).
Core treats every battery as balanced over three phases when it relieves the fuse. A one-phase battery on L2 cannot relieve L1. When L1 sits over the line and L2 has little room, the relief creeps until L2 sits about 1 % over its export line (−16.1 to −16.2 A on 16 A) for as long as L1 stays over. #1891's off-phase rule needs 690 W of battery move before it can tell the battery is off L1.
Proposal: an optional per-battery phase (L1/L2/L3) in config. When set, the relief counts the battery only on its own phase and never pushes that phase past its line.
Test: one-phase battery on L2, L1 at 18 A after a PV drop on a 16 A fuse: L2 never goes past −16.0 A, and L1 is left to the car cut and the heat model.
Activity